
5
TECHNICAL DETAILS
Specifications
Basler IP Camera BIP-1000c BIP-1300c BIP-1600c
Image Sensor 1/3’’ Sony Wfine progressive scan 1/3’’ Sony EXview HAD progressive scan 1/1.8’’ Sony Wfine progressive scan
RGB CCD RGB CCD RGB CCD
Effective Pixels 1034 (H) x 779 (V) 1296 (H) x 966 (V) 1628 (H) x1236 (V)
Frame Rate MJPEG MPEG-4 H.264** MJPEG MPEG-4 H.264** MJPEG MPEG-4 H.264**
Full Resolution: 20 fps 12 fps 7 fps 13 fps 8 fps 4 fps 8 fps 5 fps 3 fps
D1 (720 x 480): 30 fps 30 fps 18 fps 30 fps 30 fps 18 fps 30 fps* 30 fps* 18 fps*
Max sensor readout rate: 30 fps Max sensor readout rate: 30 fps Max sensor readout rate: 14 fps * by AOI
Pixel Size 4.65 µm x 4.65 µm 3.75 µm x 3.75 µm 4.40 µm x 4.40 µm
Sensitivity 1.3 lux (F 1.4 / 30 ms) tbd 0.6 lux (F 1.4 / 30 ms)
Lens CS-mount, DC iris drive CS-mount, DC iris drive CS-mount with adapter ring, DC iris drive
Image Settings Automatic gain, exposure area, backlight compensation, white balance, electronic shutter, 180° image rotation,
electronic PTZ via AOI (API), text overlay, privacy masks, motion detection
Resolution From 160 x 120 to 1024 x 768 (free scaling), From 160 x 120 to 1280 x 960 (free scaling), From 160 x 120 to 1600 x 1200 (free scaling),
4:3, 16:9, multiple Areas of Interest (AOIs) 4:3, 16:9, multiple Areas of Interest (AOIs) 4:3, 16:9, multiple Areas of Interest (AOIs)
Video Compression Motion JPEG: Multiple compression Levels
MPEG-4: SP (Level 3), ASP (Level 5)
H.264** (MPEG-4 AVC): Baseline (Level 3)
Video Streaming Simultaneous dual encoding for MJPEG and MPEG-4 or H.264**, multi-streaming for MJPEG,
multicast and unicast, VBR and CBR for MPEG-4 and H.264**
Alarm Management Ring buffer for pre and post alarm
Events triggered by motion detection, external input, or scheduling
Image upload over FTP, Email, or HTTP
Protocols TCP/IP, HTTP, HTTPS**, UDP, ICMP, ARP, DHCP, NTP, RTP, RTSP, RTCP, SMTP, IGMP, UPnP
Processor/Memory 600 MHz dual-core multimedia DSP, FPGA
128 MB RAM, 8 MB flash, battery backed-up real-time clock
Power PoE (Power over Ethernet IEEE 802.3af) or 7 to 20 VDC, power consumption is 5 W max at 12 VDC
Connectors Screwable RJ-45 connector for 10/100 BASE-T Ethernet, full or half duplex
6 pin Phoenix terminal for DC power, digital I/O and RS-232
Operating Conditions 0° to 50° C (32° to 122° F), 20 % to 80 % relative humidity (non-condensing)
Standards FCC Class B, CE, RoHS
Housing 89.2 mm x 29 mm x 44 mm (full metal casing)
Weight ~230 g
Specifications are subject to change without prior notice. ** available in Q4/2008 by firmware update
Architecture
Flash SDRAM Ethernet PoE
AUX
Power
RS 232
Digital
I/O
R T C
DSP
FPGA
DC-Iris
ADCSensor
Sensor Board Core Board I/O Board
Comentarios a estos manuales